1- Overviews
- A full visual control of Data Acquisition device(16*10GE SFP+ ports)
- A full Data Scheduling Management device(duplex Rx/Tx processing)
- Adopts ASIC dedicated chip pure hardware design, high-speed backplane switching bus bandwidth up to 160Gbps
- Supported collection & reception of link data from different network element locations
- Supported full line rate traffic capture, replication, aggregation, filtering, shunting, copying and other functions
- Supported raw packet collected, identified, analyzed, statistically summarized and marked
- Supported flexible combination of elements traffic filtering such as ethernet type, vlan tag, vlan priority information, MAC address, IP quintuple, IPV6 information, IP fragmentation analysis, tcp flag, packet characteristics, port number, etc. Security equipment, protocol analysis, signaling analysis, and other traffic monitoring deployment requirements.
- Supported flexible combination of elements based on ip quintuple, tunnel inner and outer information, ethernet type, vlan tag, MAC address, etc., and selection of multiple different HASH algorithms to further satisfy various network security devices, protocol analysis, and signaling analysis for traffic monitoring deployment requirements
- Supported real-time packet capture analysis, data source identification
2- System Block Diagram
4- Intelligent Traffic Processing Abilities
VLAN Tagged 
ASIC Chip Plus TCAM CPU 160Gbps intelligent traffic processing capabilities 
Data Replication Packet replicated from 1 port to multiple N ports, or multiple N ports aggregated, then replicated to multiple M ports 
Data Replication Packet replicated from 1 port to multiple N ports, or multiple N ports aggregated, then replicated to multiple M ports 
Data Distribution Classified the incoming metdata accurately and discarded or forwarded different data services to multiple interface outputs according to user’s predefined rules. 
Data Filtering Supported L2-L7 packet filtering matching, such as SMAC, DMAC, SIP, DIP, Sport, Dport, TTL, SYN, ACK, FIN, Ethernet type field and value, IP protocol number, TOS, etc. also supported flexible combination of filtering rules. 
Load Balance Supported load balance Hash algorithm and session-based weight sharing algorithm according to L2-L7 layer characteristics to ensure that the port output traffic dynamic of load balancing 
Unified Control Platform Supported mylinking™ Visibilityl Control Platform Access Supported the matching of any key field in the first 128 bytes of a packet. The user can customize the offset value and key field length and content, and determine the traffic output policy according to the user configuration.VLAN Untagged VLAN Replaced 
UDF Match Supported the matching of any key field in the first 128 bytes of a packet. Customized the Offset Value and Key Field Length and Content, and determining the traffic output policy according to the user configuration 
MAC Address Replacement Supported the replacement of the destination MAC address in the original data packet, which can be implemented according to the user's configuration 
3G/4G Mobile Protocol Recognition/Classification Supported to identify mobile network elements such as (Gb, Gn, IuPS, S1-MME, S1-U, X2-U, S3, S4, S5, S6a, S11, etc. interface). You can implement traffic output policies based on features such as GTPV1-C, GTPV1-U, GTPV2-C, SCTP, and S1-AP based on user configurations.
Ports Healthy Detection Supported real-time detection of the service process health of the back-end monitoring and analysis equipment connected to different output ports. When the service process fails, the faulty device is automatically removed. After the faulty device is recovered, the system automatically returns to the load balancing group to ensure the reliability of multi-port load balancing.
VLAN, MPLS Untagged Supported the VLAN, MPLS header in the original data packet is stripped and output. 
1+1 Redundant Power System(RPS) Supported 1+1 Dual Redundant Power System
Tunneling Protocol Identify Supported automatically identify various tunneling protocols such as GTP / GRE / PPTP / L2TP / PPPOE. According to the user configuration, the traffic output strategy can be implemented according to the inner or outer layer of the tunnel 5- Mylinking™ Network Packet Broker Typical Application Structures
5.1 Mylinking™ Network Packet Broker N*10GE to 10GE Data Aggregation Application(as following)
5.2 Mylinking™ Network Packet Broker GE/10GE Hybrid Access Application(as following)
6- Specifications
| ML-NPB-1610 Mylinking™ Network Packet Broker TAP/NPB Functional Parameters | ||
| Network Interface | 10GE | 16*10GE/GE SFP+ slot; support single/multiple mode fiber |
| Out-of-Band MGT interface | 1*10/100/1000M electrical port | |
| Deploy mode | 10G optical splitting | Support 8*10G bidirectional link traffic acquisition |
| 10G mirror acquisition | Support max to 16*10G mirror traffic inputting | |
| Optical inputting | Input port supports single fiber splitting input; | |
| Port multiplexing | Support input port as output port; | |
| Flow output | Support 16 channels of 10GE flow output; | |
| Traffic aggregating/replicating/distribution | Supported | |
| QTYs of links supporting traffic duplicating/aggregating | 1->N way traffic replication (N<16) N->1 channel traffic aggregation (N<16) Group G (M->N way) grouped traffic replication aggregation [ G*(M+N) < 16 ] | |
| Port-based traffic identification diverting | Supported | |
| port five tuple traffic identification diverting | Supported | |
| Traffic identification divert strategy based on key tag of protocol header | Supported | |
| Ethernet encapsulation unrelated support | Supported | |
| CONSOLE MGT | Supported | |
| IP/WEB MGT | Supported | |
| SNMP MGT | Supported | |
| TELNET/SSH MGT | Supported | |
| SYSLOG protocol | Supported | |
| User authentication | Based on users’ password authentication | |
| Electric(1+1 Redundant Power System-RPS) | Rate power supply voltage | AC110-240V/DC-48V(Optional) |
| Rate power supply frequency | AC-50HZ | |
| Rate input current | AC-3A / DC-10A | |
| Rate power | 140W/150W/150W | |
| Environment | Working temperature | 0－50℃ |
| Storage temperature | -20-70℃ | |
| Working humidity | 10%-95%, no condensation | |
| User Configuration | Console configuration | RS232 interface, 9600,8,N,1 |
| Password authentication | Supported | |
| Height of Chassis | (U) | 1U 445mm*44mm*402mm |
7- Order Information
ML-NPB-0810 mylinking™ Network Packet Broker 8*10GE/GE SFP+ ports, max 80Gbps ML-NPB-1610 mylinking™ Network Packet Broker 16*10GE/GE SFP+ ports, max 160Gbps ML-NPB-2410 mylinking™ Network Packet Broker 24*10GE/GE SFP+ ports, max 240Gbps3- Operating Principle
10GE Acquisition 10GE 16 ports, Rx/Tx duplex processing, up to 160Gbps Traffic Data Transceiver at same time, for network Data Acquisition, simple Pre-processing