1- Overviews
- A full Network Visibility control for packet capture device(4 * GE 10/100/1000M BASE-T ports, plus 8*GE SFP ports)
- A full duplex line speed network traffic free forwarding ability plus scheduling management (duplex Rx/Tx processing)
- A full pre processing and re-distribution network tap device(bidirectional bandwidth 12Gbps)
- Supported Link-Reflect and Link-SafeSwitch enable redundant equipment and routing mechanism, achieve fast traffic switching, effectively shorten network failure recovery time, and enhance network reliability to keep up/down Ethernet Port Link status without lost.
- Supported network traffic raw packet collected, identified, analyzed, statistically summarized and marked
- Supported traffic capture for 1G copper Ethernet and 1G single multi-mode optical Ethernet links in inline serial deployment, SPAN port mirroring and two collection modes can be mixed
- Supported packet filtering matching such as SMAC, DMAC, SIP, DIP, Sport, Dport, TTL, SYN, ACK, FIN packet characteristics, Ethernet type fields and values, IP protocol number, TOS and up to 2K filtering rules. Supports IP fragment analysis
4- Intelligent Traffic Processing Abilities
ASIC Chip Plus TCAM CPU 12Gbps intelligent traffic processing capabilities 
Data Replication Packet replicated from 1 port to multiple N ports, or multiple N ports aggregated, then replicated to multiple M ports 
Data Aggregation Packet replicated from 1 port to multiple N ports, or multiple N ports aggregated, then replicated to multiple M ports 
Data Distribution Classified the incoming network traffic metdata accurately and discarded or forwarded different data services to multiple interface outputs according to user’s predefined rules. 
Smart Data Filtering Supported L2-L7 packet filtering matching, such as SMAC, DMAC, SIP, DIP, Sport, Dport, TTL, SYN, ACK, FIN, Ethernet type field and value, IP protocol number, TOS, etc. also supported flexible combination of up to 2000 filtering rules.
Unified Control Platform Supported mylinking™ Visibility Control Platform Access 
UDF Match Supported the matching of any key field in the first 128 bytes of a packet. Customized the Offset Value and Key Field Length and Content, and determining the traffic output policy according to the user configuration 1+1 Redundant Power System(RPS) Supported 1+1 Dual Redundant Power System Design
5.1 Mylinking™ Network Tap Smart BYPASS Function: Link-Reflect & Link-SafeSwitch
5.2 Mylinking™ Network Tap Inline Bypass Deployment Application
6- Specifications
GE Ethernet or SFP port Traffic Capture 4*GE 10/100/1000M BASE-T ports, plus 8*GE SFP ports, Rx/Tx duplex processing, up to 12Gbps Traffic Data processing at same time, for network traffic acquisition, simple pre-processing 
Load Balance Supported load balance Hash algorithm and session-based weight sharing algorithm according to L2-L7 layer characteristics to ensure that the port output traffic dynamic of load balancing 5.4 Mylinking™ Network Tap Customization Traffic Monitoring Application
5.3 Mylinking™ Network Tap Hybrid Access Application
Smart BYPASS Function Supported Link-Reflect and Link-SafeSwitch enable redundant equipment and routing mechanism, achieve fast traffic switching, effectively shorten network failure recovery time, and enhance network reliability to keep up/down of Ethernet Port Link status without packet lose.7- Order Information
ML-TAP-1201B
2- System Block Diagram
3- Operating Principle
5- Mylinking™ Network Tap Typical Application Structures
| Mylinking™ Network Tap NPB/TAP Functional Parameters | ||
| Network Interface | GE Electrical Ports | 4 ports*10/100/1000M BASE-T |
| SFP Slots | 8*GE SFP ports, support GE Optical/Electrical Module | |
| Deployment mode | Inline mode | support max 2 routes/links *10/100/1000M BASE-T inline mode |
| SPAN monitoring input | support max 11*SPAN inputs | |
| Monitoring Output | support max 11*monitoring outputs | |
| Functions | Total QTYs interface | 12 ports |
| Line speed process capability | 12Gbps | |
| Traffic replication / aggregation / distribution / forwarding / Filtering | Supported | |
| In-line mode and SPAN monitoring | Supported | |
| Up/Down Traffic Aggregation | Supported | |
| Up/Down Traffic Monitoring | Supported | |
| Distribution based on traffic identification | Supported | |
| Distribution and Filtering based on IP / protocol / port Five tuple traffic identification | Supported | |
| Optical interface single fiber transmission | Supported | |
| Support Ethernet encapsulation independence | Supported | |
| BYPASS Function(Inline mode) | Supported | |
| BYPASS switch time(Inline mode) | < 50ms | |
| Network Side Delay | < 100ns | |
| LinkReflect(Inline mode) | Supported | |
| No Flash Break when Power ON/OFF | Supported | |
| CONSOLE Network Management | Supported | |
| IP/WEB Network Management | Supported | |
| SNMP V1/V2C Network Management | Supported | |
| TELNET/SSH Network Management | Supported | |
| SYSLOG Protocol | Supported | |
| User authentication function | Password authentication based on user name | |
| Electric(1+1 Redundant Power System-RPS) | Rated supply voltage | AC110-240V/DC-48V (Optional) |
| Rated power frequency | 50HZ | |
| Rated input current | AC-3A / DC-10A | |
| Rated power function | 100W | |
| Environment | Operating Temperature | 0－50℃ |
| Storage Temperature | -20-70℃ | |
| Operating Humidity | 10%-95%, Non-condensing | |
| User Configuration | Console Configuration | RS232 interface,9600,8,N,1 |
| Password authentication | support | |
| Rack Height | Rack space (U) | 1U 485mm*44.5mm*350mm |