Mylinking™ Network Packet Broker(NPB) ML-NPB-6410+

Mylinking™ Network Packet Broker of ML-NPB-6410+ supports 64*100G/40G compatible QSFP28 interface up to 6.4Tbps traffic processing capability; Support L2-L7 Protocol Filtering function; The user defined input/output of each port, which is developed specifically for high-density and high-bandwidth Ethernet link collection requirements, realizing the whole process visual fine management of key node link data collection, centralized processing, unified scheduling, and on-demand distribution. Programmable P4 Chip Architecture supports flexible Message Encapsulation; Support matching function of inner/outer tunnel; Inner layer tunnel Hash load balancing to ensure session integrity. Support Header Stripping of VxLAN, VLAN, MPLS, GTP, GRE, IPIP, etc; Support WEB Graphical Interface Configuration; The above characteristics guarantee the linear speed processing performance.

Products Details

1-overviews

  • A full visual control of Data Acquisition device(2U 64*40/100GE QSFP28 ports)
  • A full Data Scheduling Management device(64*100GE duplex Rx/Tx processing)
  • A full pre-processing and re-distribution device(bidirectional bandwidth 6.4Tbps)
  • Supported collection & reception of link data from different network element locations
  • Supported collection & reception of link data from different switch routing nodes
  • Supported raw packet collected, identified, analyzed, statistically summarized and marked
  • Supported to realize irrelevant upper packaging of Ethernet traffic forwarding, supported all kinds of Ethernet packaging protocols, and aslo 802.1q/q-in-q, IPX/SPX, MPLS, PPPO, ISL, GRE, PPTP etc. protocol packaging
  • Supported raw packet output for monitoring equipment of BigData Analysis, Protocol Analysis, Signaling Analysis, Security Analysis, Risk Management and other required traffic.
  • Supported real-time packet capture analysis, data source identification
  • Supported P4 programmable chip solution, data compilation and action execution engine system. The hardware level support the recognition of new data types and strategy execution ability after data identification, can be customized for packet identification, quick add new function, new protocol matching. It has excellent scenario adaptation ability for the new network features. For example, VxLAN, MPLS, heterogeneous encapsulation nesting, 3-layer VLAN nesting, additional hardware level timestamp, etc.
wps_doc_6

2- Intelligent Traffic Processing Abilities

wps_doc_2

ASIC Chip Plus Multicore CPU
6.4Tbps intelligent traffic processing capabilities

wps_doc_3

100GE Acquisition
64*40/100GE QSFP28 ports Rx/Tx duplex processing, up to 6.4Tbps Traffic Data Transceiver at same time, for network Data Acquisition, simple Pre-processing

wps_doc_4

Data Replication
Packet replicated from 1 port to multiple N ports, or multiple N ports aggregated, then replicated to multiple M ports 

wps_doc_5

Data Aggregation
Packet replicated from 1 port to multiple N ports, or multiple N ports aggregated, then replicated to multiple M ports 

wps_doc_6

Data Distribution
Classified the incoming metdata accurately and discarded or forwarded different data services to multiple interface outputs according to white list, blacklist or user’s predefined rules.

wps_doc_7

Data Filtering
Input data traffic can be accurately classified, and different data services can be discarded or forwarded to the output of multiple interfaces by whitelist or blacklist rules. Flexible combination of elements such as Ethernet Type, VLAN tag, TTL, IP seven-tuple, IP fragmentation, TCP flag identification, message characteristics, etc. to meet the deployment requirements of various network security equipment, protocol analysis, signaling analysis, traffic monitoring and so on

wps_doc_8

Load Balance
Based on L2 - L4 inside and outside the characteristics of the Hash algorithm of load balance, to make sure the bypass monitoring tools to receive session the integrity of data flow, and diversion port group in the link state changes can be flexible exit (Link DOWN) or add (Link UP), automatic redistribution flow shunt group, to ensure that the port output flow dynamic load balancing.

wps_doc_10

VLAN Tagged 

wps_doc_11

VLAN Untagged

Supported the matching of any key field in the first 128 bytes of a packet. The user can customize the offset value and key field length and content, and determine the traffic output policy according to the user configuration.

wps_doc_12

 VLAN Replaced

wps_doc_12

100G & 40G Port Breakout
Support for breakout on 100G or 40G ports with 4*25GE or 4*10GE ports for specific access needs

wps_doc_17

Time Stamping
Supported to synchronize the NTP server to correct the time and write the message into the packet in the form of a relative time tag with a timestamp mark at the end of the frame, with the accuracy of nanoseconds

wps_doc_20

Data Slicing  
Supported policy-based slicing (64-1518 bytes optional) of the raw data, and the traffic output policy can be implemented based on user configuration

wps_doc_22

Tunneling Protocol Identify
Supported automatically identify various tunneling protocols such as GTP / GRE / VxLAN / PPTP / IPIP / L2TP / PPPOE. According to the user configuration, the traffic output strategy can be implemented according to the inner or outer layer of the tunnel

wps_doc_28

Packet Capturing
Supported port-level, policy-level packet capture from source physical ports within filter of  Five-Tuple field in real time

wps_doc_32

Packet Analysis
Supported the captured datagram analysis, including abnormal datagram analysis, stream recombination, transmission path analysis, and abnormal stream analysis

wps_doc_18

VxLAN, VLAN, MPLS, GTP, GRE, IPIP Header Stripping
Supported the VxLAN, VLAN, MPLS, GTP, GRE, IPIP header stripping to forward in the original data packet

wps_doc_33

Mylinking™ Network Visibility Platform
Supported Mylinking™ Matrix-SDN Visibility Control Platform Access

wps_doc_34

1+1 Redundant Power System(RPS)
Supported 1+1 Dual Redundant Power System

3- Mylinking™ Network Packet Broker Typical Application Structures

3.1 Mylinking™ Network Packet Broker Centralized Collection Replication/Aggregation Application(as following)

wps_doc_35

3.2 Mylinking™ Network Packet Broker Unified Schedule Application(as following)

wps_doc_36

3.3 Mylinking™ Network Packet Broker Packet Slicing Application(as following)

wps_doc_38

3.4 Mylinking™ Network Packet Broker Data VLAN Tagged Application(as following)

wps_doc_24

4- Specifications

Mylinking™ Network Packet Broker TAP/NPB Functional Parameters

Network Interface

100G(compatible with 40G)

64*QSFP28 slots

10G(compatible with 1G)

2*SFP+ slots

Out band interface

1*10/100/1000M cooper

Deploy Mode

Fiber Tap

Support

Mirror Span

Support

System Function

Traffic Processing

Traffic replicating/aggregating/splitting

Support

Load-balancing

Support

Filter based on IP/protocol/port quintuple traffic identification

Support

VLAN tag/untagged/replace

Support

UDF Matching

Support

Time stamping

Support

Packet Header Stripping

VxLAN, VLAN, MPLS, GRE, GTP, IPIP etc.

Data Slicing

Support

Tunnel protocol identification

Support

Single fiber transmission

Support

Ethernet package independence

Support

Processing ability

6.4Tbps

Management

CONSOLE MGT

Support

IP/WEB MGT

Support

SNMP MGT

Support

TELNET/SSH MGT

Support

SYSLOG Protocol

Support

RADIUS or AAA Centralized authorization

Support

User authentication

Authentication based on username and password

Electrical

(1+1 Redundant Power System-RPS)

Rated power supply voltage

AC110~240V/DC-48V[Optional]

Rated power frequency

AC-50/60Hz

Rated input current

AC-8A / DC-10A

Rated function power

Max 830W

Environment

Operating temperature

0-45℃

Storage temperature

-40-70℃

Working humidity

10%-95%, No condensation

User Configuration

Console Configuration

RS232 interface,115200,8,N,1

Password authentication

Support

Chassis Height

Rack Space (U)

2U 440mm*88mm*597mm

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours