1- Overviews
- A full visual control of Data Acquisition device(8*10GE SFP+ ports)
- A full Data Scheduling Management device(duplex Rx/Tx processing)
- A full pre-processing and re-distribution device(bidirectional bandwidth 80Gbps)
- Supported load balance Hash algorithm and session-based weight sharing algorithm according to L2-L7 layer characteristics to ensure that the port output traffic dynamic of load balancing
- Supported the VLAN, MPLS header in the original data packet is stripped and output.
- Supported automatically identify various tunneling protocols such as GTP / GRE / PPTP / L2TP / PPPOE. According to the user configuration, the traffic output strategy can be implemented according to the inner or outer layer of the tunnel
- Supported raw packet output for monitoring equipment of BigData Analysis, Protocol Analysis, Signaling Analysis, Security Analysis, Risk Management and other required traffic.
- Supported real-time packet capture analysis, data source identification

2- System Block Diagram

4- Intelligent Traffic Processing Abilities

















5- Mylinking™ Network Packet Broker Typical Application Structures
5.1 Mylinking™ Network Packet Broker N*10GE to 10GE Data Aggregation Application(as following)

6- Specifications
ML-NPB-0810 Mylinking™ Network Packet Broker TAP/NPB Functional Parameters | ||
Network Interface | 10GE | 8*10GE/GE SFP+ slot; support single/multiple mode fiber |
Out-of-Band MGT interface | 1*10/100/1000M electrical port | |
Deploy mode | 10G optical splitting | Support 4*10G bidirectional link traffic acquisition |
10G mirror acquisition | Support max to 8*10G mirror traffic inputting | |
Optical inputting | Input port supports single fiber splitting input; | |
Port multiplexing | Support input port as output port; | |
Flow output | Support 8 channels of 10GE flow output; | |
Traffic aggregating/replicating/distribution | Supported | |
QTYs of links supporting traffic duplicating/aggregating | 1->N way traffic replication (N<8) N->1 channel traffic aggregation (N<8) Group G (M->N way) grouped traffic replication aggregation [ G*(M+N) < 8 ] | |
Port-based traffic identification diverting | Supported | |
port five tuple traffic identification diverting | Supported | |
Traffic identification divert strategy based on key tag of protocol header | Supported | |
Ethernet encapsulation unrelated support | Supported | |
CONSOLE MGT | Supported | |
IP/WEB MGT | Supported | |
SNMP MGT | Supported | |
TELNET/SSH MGT | Supported | |
SYSLOG protocol | Supported | |
User authentication | Based on users’ password authentication | |
Electric(1+1 Redundant Power System-RPS) | Rate power supply voltage | AC110-240V/DC-48V(Optional) |
Rate power supply frequency | AC-50HZ | |
Rate input current | AC-3A / DC-10A | |
Rate power | 140W/150W/150W | |
Environment | Working temperature | 0-50℃ |
Storage temperature | -20-70℃ | |
Working humidity | 10%-95%, no condensation | |
User Configuration | Console configuration | RS232 interface, 9600,8,N,1 |
Password authentication | Supported | |
Height of Chassis | (U) | 1U 445mm*44mm*402mm |
7- Order Information
ML-NPB-0810 mylinking™ Network Packet Broker 8*10GE/GE SFP+ ports, max 80Gbps ML-NPB-1610 mylinking™ Network Packet Broker 16*10GE/GE SFP+ ports, max 160Gbps ML-NPB-2410 mylinking™ Network Packet Broker 24*10GE/GE SFP+ ports, max 240Gbps3- Operating Principle

