1- Overviews
- A full visual control of Data Acquisition device(8 * GE 10/100/1000M BASE-T ports, plus 8*GE SFP ports)
- A full Data Scheduling Management device(duplex Rx/Tx processing)
- A full pre-processing and re-distribution device(bidirectional bandwidth 16Gbps)
- Supported collection & reception of link data from different network element locations
- Supported collection & reception of link data from different switch routing nodes
- Supported raw packet collected, identified, analyzed, statistically summarized and marked
- Supported L2-L7 packet filtering matching, such as SMAC, DMAC, SIP, DIP, Sport, Dport, TTL, SYN, ACK, FIN, Ethernet type field and value, IP protocol number, TOS, etc. also supported flexible combination of up to 2000 filtering rules.
- Supported raw packet output for monitoring equipment of BigData Analysis, Protocol Analysis, Signaling Analysis, Security Analysis, Risk Management and other required traffic.
- Supported real-time packet capture analysis, data source identification
4- Intelligent Traffic Processing Abilities
ASIC Chip Plus TCAM CPU 16Gbps intelligent traffic processing capabilities 
Data Replication The network packet replicated from 1 port to multiple N ports, or multiple N ports aggregated, then replicated to multiple M ports 
Data Aggregation The network packet replicated from 1 port to multiple N ports, or multiple N ports aggregated, then replicated to multiple M ports 
Data Distribution Classified the incoming network traffic metdata accurately and discarded or forwarded different data services to multiple interface outputs based on user’s predefined rules. 
Data Filtering Supporting L2-L7 packet filtering matching, such as SMAC, DMAC, SIP, DIP, Sport, Dport, TTL, SYN, ACK, FIN, Ethernet type field and value, IP protocol number, TOS, etc. also supported flexible combination of up to 2000 filtering rules.
Unified Control Platform Supported mylinking™ Visibility Control Platform to Manage
UDF User Defined Function Match Supported the User Defined Function to match any key field in the first 128 bytes of a packet. Customized the Offset Value and Key Field Length and Content, and determining the traffic output policy according to the user configuration 1+1 Redundant Power System(RPS) Supported 1+1 Dual Redundant Power Supply System
5.1 Mylinking™ Network Tap Smart BYPASS Function: Link-Reflect & Link-SafeSwitch(as following)
5.2 Mylinking™ Network Tap Inline Bypass Deployment Application(as following)
6- Specifications
GE Network Traffic Capture 8*GE 10/100/1000M BASE-T ports, plus 8*GE SFP ports, Rx/Tx duplex processing, up to 16Gbps Traffic Data Transceiver at same time, for network Data Acquisition, simple Pre-processing
Loading Balance Supported load balance Hash algorithm and session-based weight sharing algorithm according to L2-L7 layer characteristics to ensure that the port output traffic dynamic of load balancing 5.4 Mylinking™ Network Tap Customization Traffic Monitoring Application(as following)
5.3 Mylinking™ Network Tap Hybrid Access Application(as following)
7- Order Information
ML-TAP-1601B
2- System Block Diagram
3- Operating Principle
5- Mylinking™ Network Tap Typical Application Structures
| Mylinking™ Network Tap NPB/TAP Functional Parameters | ||
| Network Interface | GE Electrical Ports | 8 ports*10/100/1000M BASE-T |
| SFP Slots | 8*GE SFP ports, support GE Optical/Electrical Module | |
| Deployment mode | Inline mode | support max 4 routes/links *10/100/1000M BASE-T inline mode |
| SPAN monitoring input | support max 15*SPAN inputs | |
| Monitoring Output | support max 15*monitoring outputs | |
| Functions | Total QTYs interface | 16 ports |
| Line speed process capability | 16Gbps | |
| Traffic replication / aggregation / distribution / forwarding / Filtering | Supported | |
| Inline mode and SPAN monitoring | Supported | |
| Up/Down Traffic Aggregation | Supported | |
| Up/Down Traffic Monitoring | Supported | |
| Distribution based on traffic identification | Supported | |
| Distribution and Filtering based on IP / protocol / port Five tuple traffic identification | Supported | |
| Optical interface single fiber transmission | Supported | |
| Support Ethernet encapsulation independence | Supported | |
| BYPASS Function(Inline mode) | Supported | |
| BYPASS switch time(Inline mode) | < 50ms | |
| Network Side Delay | < 100ns | |
| LinkReflect(Inline mode) | Supported | |
| No Flash Break when Power ON/OFF | Supported | |
| CONSOLE Network Management | Supported | |
| IP/WEB Network Management | Supported | |
| SNMP V1/V2C Network Management | Supported | |
| TELNET/SSH Network Management | Supported | |
| SYSLOG Protocol | Supported | |
| User authentication function | Password authentication based on user name | |
| Electric(1+1 Redundant Power System-RPS) | Rated supply voltage | AC110-240V/DC-48V (Optional) |
| Rated power frequency | 50HZ | |
| Rated input current | AC-3A / DC-10A | |
| Rated power function | 100W | |
| Environments | Operating Temperature | 0－50℃ |
| Storage Temperature | -20-70℃ | |
| Operating Humidity | 10%-95%, Non-condensing | |
| User Configuration | Console Configuration | RS232 interface,9600,8,N,1 |
| Password authentication | support | |
| Rack Height | Rack space (U) | 1U 485mm*44.5mm*350mm |
