Mylinking™ Network Tap ML-TAP-2401B

Mylinking™ Network Tap of ML-TAP-2401B has up to 24Gbps processing capacity. It could be deployed as optical splitting, mirroring span access or 8 electrical links inline bypass series. Supports maximum 8 * GE SFP slots and 16 * GE electrical ports; SFP slot flexibly supports Gigabit single/multi-mode optical modules and Gigabit electrical modules. Each interface can support traffic input/output function; In the inline mode, the gigabit electrical interface adopts intelligent anti-flash break design; The inline 1G Ethernet interfaces can be configured in either inline serial mode or mirroring mode, and can be flexibly deployed according to user requirements.

Products Details

1- Overviews

  • A full visual network triffc capture device with 16 * GE 10/100/1000M BASE-T ports, and 8*GE SFP slots
  • A full Data Scheduling Management device(duplex Rx/Tx processing)
  • A full pre-processing and re-distribution device(bidirectional bandwidth 24Gbps)
  • Supported capture & receive the link data from different network element locations
  • Supported collection & reception of link data from different switch routing nodes
  • Supported raw packet capture, identifie, analysis, statistically summarize and mark
  • Supported to realize irrelevant upper packaging of Ethernet traffic forwarding, supported all kinds of Ethernet packet protocols, and aslo 802.1q/q-in-q, IPX/SPX, MPLS, PPPO, ISL, GRE, PPTP etc. protocol packaging
  • Supported raw packet forwarding for monitoring like BigData Analysis, Protocol Analysis, Signaling Analysis, Security Analysis, Risk Management and other network traffic request
  • Supported real-time packet capture analysis, data source identification, etc.

4- Intelligent Traffic Processing Abilities

ASIC Chip Plus TCAM CPU 24Gbps intelligent traffic processing capabilities
Network Traffic Replication Packet replicated from 1 port to multiple N ports, or multiple N ports aggregated, then replicated to multiple M ports
Network Traffic Aggregation Packet replicated from 1 port to multiple N ports, or multiple N ports aggregated, then replicated to multiple M ports
Data Distribution and Forwording Classified the incoming metdata accurately and discarded or forwarded different data services to multiple interface outputs according to user’s predefined rules.
Network Packet Filtering Supported L2-L7 packet filtering matching, such as SMAC, DMAC, SIP, DIP, Sport, Dport, TTL, SYN, ACK, FIN, Ethernet type field and value, IP protocol number, TOS, etc. And also supported flexible combination of filtering rules.
Unified Control Platform Supported mylinking™ Visibility Control Platform Access1+1 Redundant Power System(RPS) Supported 1+1 Dual Redundant Power System5.1 Mylinking™ Network Tap Smart BYPASS Function: Link-Reflect & Link-SafeSwitch(as following)
5.4 Mylinking™ Network Tap Customization Traffic Monitoring Application(as following)

6- Specifications

GE Traffic Capture 16*GE 10/100/1000M BASE-T ports, plus 8*GE SFP ports, Rx/Tx duplex processing, up to 24Gbps Traffic Data Transceiver at same time, for network Data Acquisition, simple Pre-processing
Load Balance Supported load balance Hash algorithm and session-based weight sharing algorithm according to L2-L7 layer characteristics to ensure that the port output traffic dynamic of load balancing

7- Order Information

ML-TAP-2401B

2- System Block Diagram

3- Operating Principle

5- Mylinking™ Network Tap Typical Application Structures

Mylinking™ Network Tap NPB/TAP Functional Parameters

Network Interface GE Electrical Ports

16 ports*10/100/1000M BASE-T

SFP Slots

8*GE SFP ports, support GE Optical/Electrical Module

Deployment mode Inline mode

support max 8 routes/links *10/100/1000M BASE-T inline mode

SPAN monitoring input

support max 23*SPAN inputs

Monitoring Output

support max 23*monitoring outputs

Functions

Total QTYs interface

24 ports

Line speed process capability

24Gbps

Traffic replication / aggregation / distribution / forwarding / Filtering

Supported

In-line mode and SPAN monitoring

Supported

Up/Down Traffic Aggregation

Supported

Up/Down Traffic Monitoring

Supported

Distribution based on traffic identification

Supported

Distribution and Filtering based on IP / protocol / port Five tuple traffic identification

Supported

Optical interface single fiber transmission

Supported

Support Ethernet encapsulation independence

Supported

BYPASS Function(Inline mode)

Supported

BYPASS switch time(Inline mode)

< 50ms

Network Side Delay

< 100ns

LinkReflect(Inline mode)

Supported

No Flash Break when Power ON/OFF

Supported

CONSOLE Network Management

Supported

IP/WEB Network Management

Supported

SNMP V1/V2C Network Management

Supported

TELNET/SSH Network Management

Supported

SYSLOG Protocol

Supported

User authentication function Password authentication based on user name

Electric(1+1 Redundant Power System-RPS)

Rated supply voltage

AC110-240V/DC-48V (Optional)

Rated power frequency

50HZ

Rated input current

AC-3A / DC-10A

Rated power function

100W

Environment

Operating Temperature

0-50℃

Storage Temperature

-20-70℃

Operating Humidity

10%-95%, Non-condensing

User Configuration

Console Configuration

RS232 interface,9600,8,N,1

Password authentication

support

Rack Height

Rack space (U)

1U 485mm*44.5mm*350mm

ML-TAP-1201B mylinking™ Network Tap @ 4*GE 10/100/1000M BASE-T ports, plus 8*GE SFP ports, max 12Gbps ML-TAP-1601B mylinking™ Network Tap @ 8*GE 10/100/1000M BASE-T ports, plus 8*GE SFP ports, max 16Gbps ML-TAP-2401B mylinking™ Network Tap @ 16*GE 10/100/1000M BASE-T ports, plus 8*GE SFP ports, max 24Gbps
UDF Match Supported the matching of any key field in the first 128 bytes of a packet. Customized the Offset Value and Key Field Length and Content, and determining the traffic output policy according to the user configuration
Smart BYPASS Function Supported Link-Reflect and Link-SafeSwitch enable redundant equipment and routing mechanism, achieve fast traffic switching, effectively shorten network failure recovery time, and enhance network reliability to keep up/down Ethernet Port Link status without lost.5.2 Mylinking™ Network Tap Inline Bypass Deployment Application(as following)
5.3 Mylinking™ Network Tap Hybrid Access Application(as following)Mylinking™ brand new Network Traffic Replication Aggregator Tap is freely directed outputs such as traffic acquisition, traffic aggregation, traffic shunting and load balancing for Gigabit Ethernet links. This network tap aggregator built in flow engine to strategic orientation, while traditional TAP network flow capture complete, all can be inline concatenated and SPAN port traffic deployment. Based on flexible control strategy oriented network packet diversion, replication, or aggregation, it can accurately forward the right traffic types, to meet all kinds of network security equipment, protocol analysis, and signal analysis, such as network traffic monitoring or security deployment requirements.FYR: Network Traffic Data Information Insights Management 1- For Data Source •Acquisition: SPAN/Splitter •Related Position: XX Switch, XX Internet Link, XX Rack Position •Related Network Topology 2- For Data Content Classify •Business Object View, Business/Service Binding •Data Classification Policy bind to Business Object •Data Control Strategy Overview •Data Slice •Data Deduplication •Data Masking 3- For Data Content Outgoing •For traffic output device info management-IDS/Audit/NPM/APM •Cover target device location information management (XX Machine Room/Rack Position/Output Point) 4- For Overall Status •Input/Output/Internet Link Traffic Status Unified Monitoring •Large modular screen to display traffic data information(Acquisition Point/Output point Traffic Trend, Packet Length & Type Distribution) •Integrated traffic situation monitoring

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours